• Home
  • Products
  • Where to buy
  • Support
  • Company
  • Contact Us
    •  Shopping Cart : 0 Items
  • You are here : Home > Products > Line-Interactive (AVR) UPS > Power Pro Series
    550VA - 2000VA
    SRP : $ 272.99
    Add to Cart

    Capacity: 2000VA / 1200W
    Topology: Line-interactive
    Waveform: Simulated sine wave
    Outlets: 8

    • AVR for battery-backed outlets
    • Surge suppression
    • LCD screen
    • Auto restart
    • Off-mode charging
    • Power management software
    • RJ-11 / 45 phone / fax / network combo ports

    Shop this item from our online store


    The Power Pro line-interactive UPS provides reliable battery backup and power protection for electronic devices from brief blackouts, brownouts, overvoltages, undervoltages, and surges. The automatic voltage regulation feature adjusts minor voltage fluctuations and maintains constant voltage levels to connected equipment for a better user experience. In the event of an extended blackout, the battery-backed outlets gives you some time to safely shutdown your computer or you can set up the included power management software to set shut down parameters.

    Typical Applications
    Gaming Computers
    Gaming Consoles
    Home Theater Electronics
    Point-of-Sale Devices
    Surveillance Systems
    Small Servers
    Security Systems
    VoIP / PBX Systems

    Main Features
    (4) Battery-Backed Outlets with AVR Function and Surge Protection
    These outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes.

    If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets.

    (4) Surge-Protected Outlets
    Connect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes.

    Automatic Voltage Regulation (AVR)
    Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor over voltages and under voltages, and temporary blackouts.

    The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery. This series offers 2-boost and 1-buck AVR function.

    Smart Battery Management
    Maximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.

    Power Management Software
    Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.
    Phone / Network / Fax Line Suppression (RJ-11/45 Ports)
    Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line.

    LCD Screen
    See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.

    Overload Protection
    Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.

    Cold Start Capable
    Turn on the UPS even without utility power as long as there is sufficient battery power.

    Auto-Restart During AC Recovery
    Once power returns to normal and the battery levels sufficient, the UPS will automatically restart.

    Off-Mode Charging
    The UPS continue charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.

    Enable / Disable Audible Alarm
    Enable or disable the audible alert for your unit.

    To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once when the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches low battery state.

    Warranty (US & Canada)
    3-year equipment warranty, 2-year battery warranty, and 3-year $25,000 connected equipment warranty with product registration. See the Warranty page for additional information.

    WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which is known to the State of California to cause harm and cancer. The battery in this product can exposure you to chemicals including lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.